C9 XP-2

Thanks to a new joints system, the C9 XP-2 is a fast and rapid machine to operate, easy to use (user-friendly). Total fl exibility is the key word. The new joints system of the C9 XP-2 allows reaching the most extreme spots.

The SPM – Smart Power Management – and the full load sensing hydraulic system allow an intelligent engine power management to improve performance of the machinery and reduce fuel consumption. Available in hydraulic and full radio-controlled version, the new C9 XP-2 is designed thinking of the operator.

The Smart Power Management (SPM) is an intelligent engine power management system that improves performances and productivity of the machinery. The SPM system monitors the momentary power fl ows and immediately allocates the available power to the different jobs, so the operation function has always the maximum power available.

The XP hydraulic power system uses the Full Load Sensing (FLS) technology. Unlike the common hydraulic managing systems, the FLS pressurizes only the required amount of oil requested by users thanks to the back-action between pumps and distributors. It allows to manage the power demands and reduces dissipations, achieving up to the 25% of fuel saving (calculated on the basis of a theoretical working cycle).

More Details:The Smart Power Management (SPM) is an intelligent engine power management system that improves performances and productivity of the machinery. The SPM system monitors the momentary power flows and immediately allocates the available power to the different jobs, so the operation function has always the maximum power available.The XP-2 hydraulic power system uses the Full Load Sensing (FLS) technology. Unlike the common hydraulic managing systems, the FLS pressurizes only the required amount of oil requested by users thanks to the back-action between pumps and distributors. It allows to manage the power demands and reduces dissipations, achieving up to the 25% of fuel saving (calculated on the basis of a theoretical working cycle).The C9 XP-2 has a very low sound emission level as a result of the of sound-absorbing materials and oil heat exchangers, designed for reducing the overall noise level. The layout of the machine and the wide openings of the canopy offer comfortable and easy access for inspection and maintenance. The machine conforms to the last international standards to guarantee the maximum safety of the operations. The XP-2 control system offers the following advantages for the operator and the supervision of the work: monitoring of all working function, diagnostic of the working systems to ensure the constant monitoring of the status of sensors and components, easy conversion in any drilling arrangement, friendly customization of working functions e.g. mappings of torque and speed for EP rotary head, remote rigs assistance, diagnostic, monitoring of working parameters.

C9 XP-2EUUSA
Engine power209 kW280 HP
Width of crawler2500 mm8.2 ft
MAST
Stroke of rotary head7760/10000 mm25.5 / 32.8 ft
Extraction force150 kN33,720 lbf
Crowd force150 kN33,720 lbf
CLAMPS
Diameters152 ÷ 508 mm6 ÷ 20 in
ROTARY HEAD
Torque55000 Nm40,565 lbf ft
Max. Drilling speed50 rpm50 rpm
WEIGHT
Weight in working condition24000 kg52,900 lbs

    • Other rotary heads available
    • Drifter T40 (Back Device)
    • Rotopercussion unit HB45A, HB50A
    • A2 auxiliary winch with rope Max line pull 2000 kg
    • Cathead for auxiliary winch A2
    • Self-pivot pulley Cathead with self-pivoting pulley for auxiliary winch A2
    • Auxiliary crane
    • Jet grouting system
    • Super jet grouting arrangement
    • Hydraulic chuck type P114 – P200 for jet grouting rods
    • Flushing pump-Water pump GAMMA 202 (200 l/min max – 60 bar max)
    • Foam pump G40 (30 l/min max – 50 bar max)
    • Lubricator for down-the-hole hammer 8,5 l | 20 l
    • Mud pump NG 530 L / PH 15 (160 – 55) 170 l/min | 24 bar
    • High pressure pump cleaner
    • Safeguards according to EN 16228
    • Casagrande Live Dashboard remote rig control and monitoring via internet

Download our presentation brochure to learn more about the equipment

COMPARE MODELS

Some images of our C9 XP-2

To receive a quote from your local dealer, please fill out the form below. A dealer representative will follow up with you with the quote information you requested.

[dynamictext* your-subject "CF7_get_post_var key='title'"]



 

A WIDE RANGE OF FOUNDATION MACHINES BUILT FOR TODAY’S WORKSITES NEEDS